The Arcadia Reptile Reflector Clamp Lamp is a fully inclusive kit, containing everything you need to use Mercury Vapour and Heat Lamps safely over an open table or fitted inside of a vivarium with the free vivarium fittings kit. The Arcadia Reptile Reflector Clamp Lamp kit adheres to the very latest CE standards and includes a bolt through locking nut. This stylish kit will help to protect lamps, animals and users by insulating and reflecing heat lamps, making sure as much energy is pushing forwards as possible. The kit can also be used with UV-B compact lamps increasing UV-B projection by up to 100% when compared to a non-reflected lamp. The Arcadia Reptile reflector clamp lamp kit adheres to the very latest CE standards and includes a bolt through locking nut. Includes: - Arcadia vivarium fitting bracket - Easy-to-fit hanging bracket - Bolt-through clamp lock - Safety cage Use with a wide range of lamps up to 250w including Solar Basking Heat Lamps, Halogen Flood Lamps, DHP, D3 Basking Lamps, CHE and Compact Lamps. Available in Stainless Steel or Graphite
T5 Very High Output UVB300 Bulb
Long lasting Very High Output (VHO) UVA & UVB light
Unique phosphor blend replicates solar UVB
Suitable for animals basking in open or mid-day sunlight
UVA rays stimulate appetite, activity and reproductive behavior
UVB helps prevent Metabolic Bone Disease
Helps promote healthy Vitamin D3 synthesis
Maximizes calcium absorption
Replicates vital parts of the sunlight spectrum.
Superior UVB penetration, ideal for tall terrariums
Recommended for use with the T5 Terrarium Top
Exo Terra®’s exceptional T5 lamps are crafted in Germany to the highest quality standard, ensuring a prolonged UV output of 12+ months for lasting performance. With its intense output of UVA and UVB rays – combined with a well-balanced visible light spectrum – the Exo Terra® Reptile UVB300 T5 Very High Output Bulb is specifically designed to meet the needs of reptiles basking in open or midday sun in the Euphotic or Heliophotic Zones. The intensity of the emissions varies depending on the distance from the basking area.
Higher levels of UV are vital for the physiological wellbeing of these animals, which thrive under intense sunlight. They actively interact with their environment when the sun is high or even at its peak – showcasing an exemplary adaptation to solar intensity by optimising body temperature and UVB intake during basking behaviour.
The Exo Terra® Reptile UVB300 VHO T5 Bulb helps promote healthy Vitamin D3 synthesis, which in turn facilitates improved calcium absorption – safeguarding against Metabolic Bone Disease. Its UVA and UVB emissions surpass those of traditional T8 bulbs and energy-efficient alternatives, while enhanced UVB penetration extends its suitability for use in taller terrariums or those equipped with denser screens.
For optimal results and prolonged lifespan of the bulb, we recommend using it in conjunction with the Exo Terra® T5 Terrarium Top High-Performance Reptile UVB Fixture.
Long-lasting UVB output (12+ months).
The longer sizes can be placed across multiple terrariums.
Keepers can use the UV Index reference values to ensure that animals are exposed to an appropriate level of UV when basking. Creating a gradient – from highest safe UV index at the basking area to lowest UV index in cooler areas – means they can completely self-regulate alongside their thermoregulatory behaviours. They should not be allowed to expose themselves to more than a safe maximum and should have the freedom to escape all light completely with areas of zero UV and Infrared. This can be achieved by strategically adding plants, hides, and decorative items to create shaded zones.
To support the efficient conversion of vitamin D3 and enhance various metabolic and hormonal processes, it is beneficial to ensure that UV light exposure is complemented by an ample supply of infrared-A (NIR) radiation. The most effective sources can be found in Tungsten Halogen or standard Incandescent spot bulbs, such as the Exo Terra Intense Basking Spot or Halogen Basking Spot. This combination promotes optimal body temperature regulation and overall well-being.
Pet care lamp for use with Reptiles, Amphibians and Invertebrates only.
Ultrasonic Humidifying Fog Generator
Increases air humidity levels up to 100% RH
Great visual effect
Simulates low clouds and fog in the tropical terrariums
Generates early morning dew in desert terrariums
Adjustable fog output
Easy to install
Suitable for use on multiple Terrariums
Large 4,5 L (1.2 gal) reservoir
Automatically shuts off when water level drops below minimum
Easy to replenish water even during operation
LED water-level indicator
Whisper-quiet operation
Includes all necessary fittings and a 120cm / 48″ durable, flexible hose
Ideal for use with the Exo Terra® Thermostat & Hygrostat
The Exo Terra® Humidifier generates a cool fog through ultrasonic oscillations which simulates low hanging clouds and fog in tropical terrariums or early morning dew in desert terrariums. This Ultrasonic Humidifying Fog Generator with adjustable fog output control and 4,5 L (1.2 gal) reservoir is powerful enough to increase the humidity of multiple terrariums up to 100% RH. Created to be installed outside of the terrarium, its slim design allows it to fit in any Terrarium Cabinet. Equipped with a 120cm / 48″ durable, flexible hose and multiple fittings, the Humidifier is suitable for various terrarium types and powerful enough to split the hose to humidify 2 terrariums (or more, by using the optional Humidifier Extension Kit). The Humidifier has a LED indicator that lights up green when there’s enough water in the reservoir, flashes red-green when the water-level is low, and red when the reservoir is empty. The Humidifier automatically shuts off when water level drops below minimum and restarts once water is replenished. The removable lid makes it easy to replenish water even while the Humidifier is in operation. With its 4,5 L (1.2 gal) reservoir, the Humidifier runs up to 20 hours per filling on full capacity, while a lower fog output will extend the duration proportionally. The Humidifier is ideal for use with the Exo Terra® Thermostat & Hygrostat (PT2464), so a specific humidity can be set up for the daytime as well as for the nighttime.
Just like a proper diet, correct temperature ranges, UVB Lighting and various other factors, providing the correct relative air humidity is vital for the proper care and maintenance of reptiles, amphibians and invertebrates. Adequate humidity levels aid the shedding process and help prevent respiratory problems. Increasing relative humidity levels after a somewhat drier period can also stimulate the reproductive behaviour in many species.
To maintain a proper humidity level in a well ventilated terrarium, you will need to use a Fogger or Humidifier. Spraying or misting is perfect to provide water droplets as drinking water but will only increase the relative humidity for a short while. Exo Terra’s ultrasonic Humidifier is ideal to increase humidity levels and create a natural misty and damp environment.
Ideal for animals that require a higher humidity, such as certain geckos, chameleons, iguanas, water dragons, frogs, toads, certain tortoises, certain snakes (like green tree pythons, emerald and other boas) and many other reptile, amphibian and invertebrate species.
Since every reptile, amphibian, invertebrate or plant species has its specific environmental needs, thoroughly research the specific humidity levels needed for your species and use the Humidifier accordingly.
PT2081 – Humidifier – Ultrasonic Humidifying Fog Generator
Additional accessories available to extend the system:PT4235 – Humidifier Extension Kit (120cm / 48″ silicone tubing, 1 x Y-connector, 2 x suction cups with holding brackets, 3 x PVC-connectors and 1 x long PVC-elbow (20cm / 8″)
Ideal for use in combination with the Exo Terra® Thermostat & Hygrostat (PT2464).
Includes:1 x flexible silicone hose (120cm / 48″)1 x Y-connector11 x PVC-connector5 x PVC-elbow1 x long PVC-elbow (20cm / 8″)3 x short PVC-pipe (9cm / 3.5″)2 x suction cup with holding brackets
Programmable Misting System
Programmable misting unit for terrariums and greenhouses
Easy to connect and install
Strong 2 BAR / 29 PSI / 200 KPA water pressure pump
Multi-directional brass spray nozzles for ultrafine misting (x2)
Pressure resistant Polyether tubing
Can be used with any water reservoir
The Exo Terra® Monsoon NANO is a programmable misting system suitable for all types of terrariums and greenhouses. The Monsoon NANO is ideally suited to supply your animals with spray water in a timely manner, and will also positively influence humidity levels through the extremely fine mist generated by the multi-directional brass spray nozzles. The spray’s duration and frequency are effortlessly customizable to cater to the specific requirements of your animals or plants. Frequent misting helps stimulate breeding behaviour, and is a necessity when housing live tropical plants such as Bromeliads, orchids, mosses, etc.
The system can be programmed to mist multiple times per 24-hour cycle, with spray durations ranging from 1 second up to 9 minutes. The Monsoon NANO can also be programmed to spray with intervals of once per day, or even up to once every 30 days.
The Monsoon NANO can be used with any water reservoir, meaning that you can adjust the water reservoir according to your needs. If little space is available, you can use a smaller reservoir, but if a Weekend or Holiday is planned, a bigger water reservoir ensures continuous operation for several days without the need for refilling.
The Exo Terra® Monsoon NANO comes with 2 easy-to-install, multi-directional brass spray nozzles, making it ideal for 1 up to 2 terrariums. The Monsoon NANO can be extended to accommodate up to 4 nozzles. The mist produced by these specially designed brass nozzles is extremely fine, creating a fog-like effect in your terrarium or greenhouse.
PT2479 – Monsoon NANO – Programmable Misting System
Contents:1 x Monsoon NANO1 x Filter with polyether tubing1 x Polyether tubing 100 cm2 x Polyether tubing 50 cm1 x T-connector2 x Support suction cups2 x Multi-directional Brass Nozzles1 x set static cling clip1 x USB-A to USB-C power cable1 x Power adapter
Additional accessories available to extend the system:PT2498 – Monsoon Y-connectorPT2500 – Monsoon Water FilterPT2504 – Monsoon Polyether Tubing /1.8m / 6ftPT2506 – Brass Nozzles – Multi-directional Brass Nozzles (2x)
The ProRep Ceramic Lamp Holder has been designed to withstand high temperatures experienced when using ceramic heaters and heat lamps. Manufactured to EU safety standards and fitted with a 2 metre high temperature rated silicone cable the Pro Rep Ceramic Lamp Holder is compatible with all lamps and heaters with an E27 lamp fitting rated up to 300w.
The ProRep Ceramic Lamp Holder has been designed to withstand high temperatures experienced when using ceramic heaters and heat lamps.
Included is a fixing bracket and screws for securing the holder to the ceiling of a vivarium.
Manufactured to EU safety standards and fitted with a 2 metre high temperature rated silicone cable the Pro Rep Ceramic Lamp Holder is compatible with all lamps and heaters with an E27 lamp fitting rated up to 300w.
Bracket dimensions: Width 87mm, height 34mm, depth 40mm, (internal part of the bracket, height 31mm, width 39.5mm, depth 40mm)
